β
β

Warranty Certificate
Please enter the phone number registered to this warranty to view your certificate.
π This warranty is protected. Enter the phone number provided during installation.

Warranty Certificate
High Pressure Solar Water Heater β HomeSolar SS316 360L
Certificate No.
SS-2026-0495
Narain Marie
AddressNunkoo road, Upper Dagotiere
DistrictN/A
Contact57557443
Installation Date14 Jan 2026
InvestmentRs. 61,790
Install
14 Jan 2026
Tank 7yr
14 Jan 2033
Tubes 15yr
14 Jan 2041
14 Jan 2026
Installed
51
Days Active
Rs. 61,790
Investment
πYour Installation Location
Loading map...
π·Installation Photos
Loading photos...
Max 3 photos β’ JPG or PNG
Uploading photo...
βSystem Specifications
System Type
High Pressure Solar Water Heater
Brand / Model
HomeSolar SS316 360
Outer Tank
SS316 outer tank 0.4mm
Inner Tank
316 inner tank 0.5mm
Tank Capacity
300 L
Tube Capacity
2 L each
Tube Quantity
30 pcs
Total Capacity
360 L
Tube Size
1800mm x 58mm x 1.6mm
Frame
Aluminium frame Β±2mm anti-corrosion
Insulation
Hard foam 50mm (Germany)
Heat Preservation
96hr
Copper Coil
30 mts
Tank Warranty
β 7 Years
Tube Warranty
β 15 Years
π¦Additional Items
Removal of existing solar water heater
Plumbing Works
βWorking Principle

β¨Warranty Coverage
Tank, Frame & Accessories (SS316)
ACTIVE
7 Years Coverage2504 days remaining
Start: 14 Jan 2026
Expires: 14 Jan 2033
βΌ
Whatβs Covered
- Inner tank (316 inner tank 0.5mm) and outer tank (SS316 outer tank 0.4mm) manufacturing defects for 7 years
- Tank leakage from weld failures or material flaws
- Aluminium frame structural failure from defects
- Factory components (thermostat, T&P valve, electric backup, sensor, assistant tank) within first 12 months
- Insulation defects affecting 96hr heat preservation rating
- Copper coil heat exchanger (30 mts) leakage from manufacturing defects
- Free replacement at company discretion
Whatβs Not Covered
- Poor water quality damage (chloride >250, hardness >200, pH outside 6.5β8.5)
- Pressure exceeding 6 bar without PRV (mandatory for HP systems)
- Copper coil scaling from lack of annual flushing
- Natural disasters, cosmetic damage, unauthorised work
- Normal wear, dry firing, unauthorised relocation
- Electrical damage, consequential damages
Note: All labour and transport charges during the warranty period are payable by the customer, capped at a maximum of Rs 5,000 per intervention.
Vacuum Tubes (30 pcs)
ACTIVE
15 Years Coverage5424 days remaining
Start: 14 Jan 2026
Expires: 14 Jan 2041
βΌ
Whatβs Covered
- Tube defects (1800mm x 58mm x 1.6mm) including vacuum loss for 15 years
- Performance below 80% from manufacturing defects
- Heat pipe or seal failures
Whatβs Not Covered
- External impact, hail, vandalism
- Dirt/debris (owner responsibility)
- Dry stagnation or thermal shock
- Unauthorised work, weather damage
Performance Guarantee: 80% efficiency for 10 years, 70% for years 11β15.
Copper Coil Heat Exchanger (30 mts)
ACTIVE
7 Years (with tank)2504 days remaining
βΌ
Whatβs Covered
- Leakage from manufacturing defects
- Perforation under normal pressure (β€6 bar)
- Connection failures
Whatβs Not Covered
- Scaling from lack of annual flushing
- Corrosion from aggressive water chemistry
- Over-pressure damage (>6 bar without PRV)
HP System Note: PRV (max 6 bar) and T&P valve mandatory. Annual coil flushing strongly recommended.
βDoβs & Donβts
β
Doβs
βKeep cold water supply connected at all times
βClean tubes every 6 months with soft cloth
βTest T&P valve at least once a year
βFlush and drain tank annually
βSchedule professional service every 4 years
βFlush copper coil heat exchanger annually
βEnsure PRV installed and set to max 6 bar
β
Donβts
βNever run system without water (dry firing)
βNever use high-pressure jets on tubes
βNever attempt repairs yourself
βNever relocate without written authorisation
βNever fill empty hot system with cold water
βNever ignore cloudy or milky tubes
βNever bypass the pressure reducing valve
βGeneral Terms & Conditions
1.Warranty Commencement & Validity
βΌ
This warranty commences strictly on the date of installation as recorded on this certificate and remains valid for the duration specified for each component. The installation date is the sole reference for calculating warranty periods. This warranty is valid only when the system is installed by Sofo Soler Moris Ltd or its authorised agents.
2.Original Purchaser & Transferability
βΌ
Issued to the original purchaser at the original installation address only. Non-transferable unless written approval is obtained from Sofo Soler Moris Ltd within 14 days of ownership change.
3.Installation Requirements
βΌ
Must be installed per manufacturer guidelines and Mauritian building codes: (a) PRV where mains pressure exceeds 6 bar β mandatory for this HP system; (b) functioning T&P valve; (c) approved plumbing materials; (d) adequate structural support.
4.Water Quality Requirements
βΌ
Valid only with water meeting: pH 6.5β8.5; TDS below 500 mg/L; chloride below 250 mg/L; hardness below 200 mg/L CaCOβ. SS316 offers enhanced corrosion resistance.
5.Customer Maintenance Obligations
βΌ
To maintain warranty: (a) continuous cold water supply; (b) clean tubes every 6 months; (c) quarterly visual inspection; (d) annual tank flush; (e) annual T&P valve test; (f) professional service every 4 years; (g) annual copper coil flush. Failure to comply with any of the above may void the warranty.
6.Labour & Transport Charges
βΌ
All labour and transport costs incurred during the warranty period for inspection, repair, or replacement are payable by the customer. The maximum charge per intervention shall not exceed Rs 5,000 (Five Thousand Mauritian Rupees) inclusive of transport and labour. This charge applies to each individual service visit regardless of warranty status.
7.Warranty Claim Procedure
βΌ
Contact +230 5251 5321 or sofosoler@gmail.com within 14 days of discovering a defect. Provide certificate number, description, and photographs. Sofo Soler Moris Ltd reserves the right to inspect the system before approving any claim.
8.Repair, Replacement & Remedy
βΌ
Sofo Soler Moris Ltd will repair or replace defective components at its sole discretion. Replacements may be of equivalent specification. Repaired or replaced parts are covered only for the remainder of the original warranty period, not a new warranty period.
9.Limitation of Liability
βΌ
The total liability of Sofo Soler Moris Ltd under this warranty shall in no event exceed the original purchase price of the system. Sofo Soler Moris Ltd shall not be liable for any indirect, incidental, special, consequential, or punitive damages, including but not limited to loss of use, loss of income, property damage, water damage, or any costs arising from system failure or downtime. The customer acknowledges that this warranty is the sole and exclusive remedy.
10.Exclusion of Liability for Misuse & External Factors
βΌ
Sofo Soler Moris Ltd shall bear no liability for damage, loss, or system failure caused by: (a) misuse, neglect, or failure to follow maintenance obligations; (b) unauthorised modifications, repairs, or relocation; (c) connection to incompatible plumbing or electrical systems; (d) use of non-approved parts or accessories; (e) water quality outside specified parameters; (f) acts of third parties including plumbers not authorised by the company.
11.Force Majeure
βΌ
Sofo Soler Moris Ltd shall not be held liable for any delay or failure in performance caused by events beyond its reasonable control, including but not limited to cyclones, storms, flooding, earthquakes, pandemics, government restrictions, supply chain disruptions, or shortage of materials or parts.
12.Dispute Resolution
βΌ
Any disputes arising under this warranty shall first be resolved through good-faith negotiation. If unresolved within 30 days, the matter shall be referred to mediation. This warranty is governed by and construed in accordance with the laws of the Republic of Mauritius.
13.Entire Agreement
βΌ
This warranty certificate together with the proof of purchase constitutes the entire warranty agreement between the customer and Sofo Soler Moris Ltd. No verbal promises, representations, or agreements made prior to or at the time of purchase shall modify these terms unless confirmed in writing and signed by a director of Sofo Soler Moris Ltd.
βMaintenance Schedule
Next Professional Service
1409 days (~3.9 yrs)
Cycle Progress
3%
Last Service4-Year Service Due
β On Schedule
Next professional service in ~3.9 years. Keep performing regular owner maintenance.
6m
Every 6 Months (Owner)Clean vacuum tubes externally with soft cloth. Check for cracks or cloudy tubes.12m
Every 12 Months (Owner)Flush tank to remove sediment. Test T&P relief valve. Flush copper coil.4yr
Every 4 Years (Professional)Full inspection by Sofo Soler. Anode rod check, pressure test, coil inspection, PRV verification.!
As NeededReplace broken or cloudy tubes. Report leaks or unusual sounds immediately.πService History
No service records yet.
First professional service recommended after 4 years.
π§ Request a Service
Or call us at +230 5251 5321