⠀
⠀

Warranty Certificate
Please enter the phone number registered to this warranty to view your certificate.
Enter with or without +230 country code
🔒 This warranty is protected. Enter the full phone number provided during installation.
Warranty
Warranty Certificate
High Pressure Solar Water Heater — HomeSolar 360L
Certificate No.
SS-2024-0152
Active
👤
Customer Information
Dr Shyamlall Gangaram
Address
Lot 7, Beau Manguier, Macumba Street, Bain-Boeuf
District
R. DU REMPART
Contact
57719767
Installation Date
6 Apr 2024
Investment
Rs. 44,990
⏱
Warranty Timeline
Install
6 Apr 2024
Tank 7yr
6 Apr 2031
Tubes 15yr
6 Apr 2039
6 Apr 2024
Installed
722
Days Active
Rs. 44,990
Investment
📍
Installation Location
Loading map...
📷
Installation Photos
Loading photos...
Max 3 photos • JPG or PNG
Uploading photo...
⚙
System Specifications
System Type
High Pressure Solar Water Heater
Brand / Model
HomeSolar 360
Outer Tank
SS304 outer tank 0.4mm
Inner Tank
316 inner tank 0.5mm
Tank Capacity
300 L
Tube Capacity
2 L each
Tube Quantity
30 pcs
Total Capacity
360 L
Tube Size
1800mm x 58mm x 1.6mm
Frame
Aluminium frame ±2mm anti-corrosion
Insulation
Hard foam 50mm (Germany)
Heat Preservation
96hr
Copper Coil
30 mts
Tank Warranty
✔ 7 Years
Tube Warranty
✔ 15 Years
☀
Working Principle

⛨
Warranty Coverage
Tank, Frame & Accessories (SS304)
ACTIVE
7 Years Coverage1833 days remaining
Start: 6 Apr 2024
Expires: 6 Apr 2031
▼
What’s Covered
- Inner tank (316 inner tank 0.5mm) and outer tank (SS304 outer tank 0.4mm) manufacturing defects for 7 years
- Tank leakage from weld failures or material flaws
- Aluminium frame structural failure from defects
- Factory components (thermostat, T&P valve, electric backup, sensor, assistant tank) within first 12 months
- Insulation defects affecting 96hr heat preservation rating
- Copper coil heat exchanger (30 mts) leakage from manufacturing defects
- Free replacement at company discretion
What’s Not Covered
- Poor water quality damage (chloride >250, hardness >200, pH outside 6.5–8.5)
- Pressure exceeding 6 bar without PRV (mandatory for HP systems)
- Copper coil scaling from lack of annual flushing
- Natural disasters, cosmetic damage, unauthorised work
- Normal wear, dry firing, unauthorised relocation
- Electrical damage, consequential damages
Note: All labour and transport charges during the warranty period are payable by the customer, capped at a maximum of Rs 5,000 per intervention.
Vacuum Tubes (30 pcs)
ACTIVE
15 Years Coverage4753 days remaining
Start: 6 Apr 2024
Expires: 6 Apr 2039
▼
What’s Covered
- Tube defects (1800mm x 58mm x 1.6mm) including vacuum loss for 15 years
- Performance below 80% from manufacturing defects
- Heat pipe or seal failures
What’s Not Covered
- External impact, hail, vandalism
- Dirt/debris (owner responsibility)
- Dry stagnation or thermal shock
- Unauthorised work, weather damage
Performance Guarantee: 80% efficiency for 10 years, 70% for years 11–15.
Copper Coil Heat Exchanger (30 mts)
ACTIVE
7 Years (with tank)1833 days remaining
▼
What’s Covered
- Leakage from manufacturing defects
- Perforation under normal pressure (≤6 bar)
- Connection failures
What’s Not Covered
- Scaling from lack of annual flushing
- Corrosion from aggressive water chemistry
- Over-pressure damage (>6 bar without PRV)
HP System Note: PRV (max 6 bar) and T&P valve mandatory. Annual coil flushing strongly recommended.
✔
Do’s & Don’ts
✔
Do’s
✔Keep cold water supply connected at all times
✔Clean tubes every 6 months with soft cloth
✔Test T&P valve at least once a year
✔Flush and drain tank annually
✔Schedule professional service every 4 years
✔Flush copper coil heat exchanger annually
✔Ensure PRV installed and set to max 6 bar
✘
Don’ts
✘Never run system without water (dry firing)
✘Never use high-pressure jets on tubes
✘Never attempt repairs yourself
✘Never relocate without written authorisation
✘Never fill empty hot system with cold water
✘Never ignore cloudy or milky tubes
✘Never bypass the pressure reducing valve
⚖
General Terms & Conditions
1.Warranty Commencement & Validity
▼
This warranty commences strictly on the date of installation as recorded on this certificate and remains valid for the duration specified for each component. The installation date is the sole reference for calculating warranty periods. This warranty is valid only when the system is installed by Sofo Soler Moris Ltd or its authorised agents.
2.Original Purchaser & Transferability
▼
Issued to the original purchaser at the original installation address only. Non-transferable unless written approval is obtained from Sofo Soler Moris Ltd within 14 days of ownership change.
3.Installation Requirements
▼
Must be installed per manufacturer guidelines and Mauritian building codes: (a) PRV where mains pressure exceeds 6 bar — mandatory for this HP system; (b) functioning T&P valve; (c) approved plumbing materials; (d) adequate structural support.
4.Water Quality Requirements
▼
Valid only with water meeting: pH 6.5–8.5; TDS below 500 mg/L; chloride below 250 mg/L; hardness below 200 mg/L CaCO₃. SS304 requires strict water quality compliance.
5.Customer Maintenance Obligations
▼
To maintain warranty: (a) continuous cold water supply; (b) clean tubes every 6 months; (c) quarterly visual inspection; (d) annual tank flush; (e) annual T&P valve test; (f) professional service every 4 years; (g) annual copper coil flush. Failure to comply with any of the above may void the warranty.
6.Labour & Transport Charges
▼
All labour and transport costs incurred during the warranty period for inspection, repair, or replacement are payable by the customer. The maximum charge per intervention shall not exceed Rs 5,000 (Five Thousand Mauritian Rupees) inclusive of transport and labour. This charge applies to each individual service visit regardless of warranty status.
7.Warranty Claim Procedure
▼
Contact +230 5251 5321 or sofosoler@gmail.com within 14 days of discovering a defect. Provide certificate number, description, and photographs. Sofo Soler Moris Ltd reserves the right to inspect the system before approving any claim.
8.Repair, Replacement & Remedy
▼
Sofo Soler Moris Ltd will repair or replace defective components at its sole discretion. Replacements may be of equivalent specification. Repaired or replaced parts are covered only for the remainder of the original warranty period, not a new warranty period.
9.Limitation of Liability
▼
The total liability of Sofo Soler Moris Ltd under this warranty shall in no event exceed the original purchase price of the system. Sofo Soler Moris Ltd shall not be liable for any indirect, incidental, special, consequential, or punitive damages, including but not limited to loss of use, loss of income, property damage, water damage, or any costs arising from system failure or downtime. The customer acknowledges that this warranty is the sole and exclusive remedy.
10.Exclusion of Liability for Misuse & External Factors
▼
Sofo Soler Moris Ltd shall bear no liability for damage, loss, or system failure caused by: (a) misuse, neglect, or failure to follow maintenance obligations; (b) unauthorised modifications, repairs, or relocation; (c) connection to incompatible plumbing or electrical systems; (d) use of non-approved parts or accessories; (e) water quality outside specified parameters; (f) acts of third parties including plumbers not authorised by the company.
11.Force Majeure
▼
Sofo Soler Moris Ltd shall not be held liable for any delay or failure in performance caused by events beyond its reasonable control, including but not limited to cyclones, storms, flooding, earthquakes, pandemics, government restrictions, supply chain disruptions, or shortage of materials or parts.
12.Dispute Resolution
▼
Any disputes arising under this warranty shall first be resolved through good-faith negotiation. If unresolved within 30 days, the matter shall be referred to mediation. This warranty is governed by and construed in accordance with the laws of the Republic of Mauritius.
13.Entire Agreement
▼
This warranty certificate together with the proof of purchase constitutes the entire warranty agreement between the customer and Sofo Soler Moris Ltd. No verbal promises, representations, or agreements made prior to or at the time of purchase shall modify these terms unless confirmed in writing and signed by a director of Sofo Soler Moris Ltd.
🔧
Maintenance Schedule
Next Professional Service
738 days (~2.0 yrs)
Cycle Progress
49%
Last Service4-Year Service Due
✔ On Schedule
Next professional service in ~2.0 years. Keep performing regular owner maintenance.
6m
Every 6 Months (Owner)Clean vacuum tubes externally with soft cloth. Check for cracks or cloudy tubes.12m
Every 12 Months (Owner)Flush tank to remove sediment. Test T&P relief valve. Flush copper coil.4yr
Every 4 Years (Professional)Full inspection by Sofo Soler. Anode rod check, pressure test, coil inspection, PRV verification.!
As NeededReplace broken or cloudy tubes. Report leaks or unusual sounds immediately.📝
Service History
No service records yet.
First professional service recommended after 4 years.
🔧 Request a Service
Or call us at +230 5251 5321